Brass Ball Valve with ABS Butterfly Handle MBV

The Brass Ball Valve with ABS Butterfly Handle MBV is a line of valves specifically manufactured for clean water pipelines. The product connects to the pipeline by means of a threaded connection in accordance with ISO 228-1-2000.

Product parameters of Brass Ball Valve with ABS Butterfly Handle MBV

Specification of Brass Ball Valve with ABS Butterfly Handle MBV

  • Standard thread: BS21 / ISO 228-1-2000
  • Working Pressure: 145,037 Psi (10 Bar)
  • Working temperature: Max 90 degrees Celsius

⇒ Learn more: What is Psi?

Drawing of Brass ball valve MBV

Materials for manufacturing Brass Ball Valve with ABS Butterfly Handle MBV

  • Body: Bronze
  • Lid: Bronze
  • Ball: Cast iron
  • Shaft: Bronze
  • Ball gasket: Teflon Nhựa plastic
  • Hand screws: 304. stainless steel
  • Valve handle: ABS plastic
  • Shaft gasket: NBR. rubber

=> You can view and download the Catalog of Minh Hoa Valve here.

Advantages, disadvantages, and applications of the Brass Ball Valve with ABS Butterfly Handle MBV of Minh Hoa Company

Advantages of Brass Ball Valve with ABS Butterfly Handle MBV Minh Hoa company:

The main material is brass, which is a material capable of forming many different compounds with +1 and +2 oxidation states, commonly referred to as cuprous and cupric, respectively. These compounds:

  • Does not react with water, making the valve more durable. At the same time avoid the dissolution of free brass ions in water, causing harmful readings to users.
  • Reacts slowly with oxygen in the air to form a dark brown brass oxide layer, which then prevents corrosion.
  • Butterfly valve handle, making the operation easier.
  • Small valve size, very suitable for civil applications such as in bathrooms, kitchens, and toilets, …

Disadvantages of Brass Ball Valve with ABS Butterfly Handle MBV

  • Because there is only one size, it can only be used in a few pipes and a few applications.
  • The brass valve after a period of use will change color and lose its aesthetics.
  • Brass valve used after a while, the inside of the valve often appears brass salt precipitates due to a reaction with ammonium solutions in tap water.

Application of MIHA’s ABS butterfly valve

  • MIHA brass angle valve is suitable for use in indoor applications such as kitchens, bathrooms, and toilets,
  • They are used in manufacturing plants.
  • Domestic clean water pipe applications.

Instructions for the use, maintenance, installation, and operation of the valve

Note: The instructions for use presented below may not describe any particular valve in detail. To use each type of valve safely and effectively. Please read and double-check the user manual for each product, which is included with each package.

Instructions for preservation in transport and storage

For products shipped from Bao Tin Steel Co., Ltd. We guarantee valve products are in original, unworn condition.

However, the strength of the carton box may decrease due to moisture, etc. and the packaging may be damaged. Be very careful when shipping products in carton boxes.

When moving the valve, absolutely do not move by holding or holding the operating parts of the valve. As the valve operating part may fall off and the product may fall resulting in damage.

Do not drop, vibrate or place heavy objects on the valve during transportation or storage.

Store the valve in a well-ventilated room with little dust and moisture.

To maintain product quality, Bao Tin Steel can implement various protective measures:

  • Lubricating with lubricant
  • Wrap plastic bag

Before shipping to prevent rust and dust.

Please keep this condition until the valve is installed into the piping system.

When storing ball valves, keep the ball valve parts in the “fully open” state. Avoid half-opening the ball, as that may cause the seals to be deformed or damaged.

Safety measures for a pipe connection (Brass combination angle valve)

Measures before installing the valve

  • Take care to ensure enough space for the connection to the product’s piping when considering operation, maintenance, inspection, and repair.
  • Be careful not to put undue pressure on the valve and, if necessary, install additional pipe supports, etc.
  • If the pipe expands or contracts due to temperature changes, take measures to absorb the expansion and contraction.
  • Do not remove the dust cover attached to the product until just before installing the piping. Particular attention should be paid to anti-rust and anti-dust measures for products not treated with oil. In addition, a check valve may have an additional gasket fixed to the valve body. Be sure to remove these protective measures (dust cap and gasket) when installing them into the pipeline.
Do not remove the dust coverDo not remove the dust cover
  • Depending on valve specifications, desiccant (rust prevention) such as silica gel may be used for the valve. Be sure to remove this desiccant (anti-corrosion agent) before installing it into the pipeline.
  • Before connecting the product, remove the cutting oil, workpiece, foreign matter, etc. from the connection and inside the pipe. At the same time, thoroughly clean the inner and outer surfaces of the valve.
  • Also, make sure that there are no harmful scratches on the joints (flanges, threads, welds, etc.).

Measures during and after valve installation

  • or products with restricted flow direction (Check valve, …), note the direction of the arrow indicated on the valve body before mounting. So that it is in the same direction as the desired flow.
  • If the front and rear pipelines of the check valve are used, a reducer/eccentric reducer is used. Please note, the check valve must be installed at a distance of 5 times or more from the reducer. To ensure that the valve works properly and is not affected by unstable flow, eddy currents form after the fitting.
Note when the valve is installed before or after the clutch
Note when the valve is installed before or after the clutch
  • When installing butterfly valves or butterfly check valves near welding fittings, threaded fittings, etc. Install the accessory as far upstream as possible. If installing downstream, install in the direction of the same flow rate on the left and right sides of the valve body.
Attention when installing with elbow/short elbow attachment
Attention when installing with elbow/short elbow attachment
  • Gently open the relief valve and butterfly valve before opening the pipeline. If the pipeline is operated with the valve fully closed; the valve may no longer open. Or if force is used to try to open it, it can damage the valve disc, the suspension system (elastic parts, shock absorbers such as springs, …) of the valve or valve seat.

Valve User Manual

How to install threaded connection valves

  • When threading pipes, use the thread standard suitable for the valve product used.
  • For the sealing material of the threaded part (melt tape, …), use a material suitable for the working fluid, temperature, etc. Also, make sure that sealing material does not enter the valve.
  • Do not use a wrench on the product to work with pipes.
  • As shown in the figure, when connecting the product to the pipe, use a suitable tool such as a wrench at the end of the connection on the side closest to the pipe.
Wrench User Manual
Wrench User Manual
  • The valve will be damaged due to the pipe ends being bumped when screwed too tight. Please turn gently, just enough to run the thread in the valve.
Be careful when inserting the pipe into the valve
Be careful when inserting the pipe into the valve
  • For threaded ball valves, do not apply force in the (counterclockwise) direction. This will loosen the bond between the body and the cap.
Structural drawing of the ball valve lever
Structural drawing of the ball valve lever


=> See also the instructions for use that are packaged with each product.។

Installation instructions for flanged valves

  • Gradually tighten the bolts with an equal force so that the bolts on the diagonal are not tightened unevenly according to the procedure illustrated in the figure. Tighten the bolts at least twice.
Instructions for tightening bolts for flanged valves
Instructions for tightening bolts for flanged valves


  • Use washers that meet the conditions of use and do not protrude on the inside diameter side of the connector face
  • Do not use gaskets for butterfly valves when the sealing ring is integrated with the rubber plate.
Do not use a gasket for the butterfly valve
Do not use a gasket for the butterfly valve
  • When fitting flanged valves with the outside surface lined or coated. Use beveled flat washers or the like to avoid damage to the lining surface when tightening bolts.
Valve actuator installation instructions
Valve actuator installation instructions

=> See also the instructions for use that are packaged with each product.

Be careful when using, and operating (Brass combination angle valve)

Notes on valve maintenance

After installing the pipeline, make sure to fully open the valves of the pipeline. And remove foreign matter inside the pipe by flushing (cleaning the inside of the pipe). Never open or close the valve during this flush.

The packing pressure may be reduced due to stress relaxation. Occurs due to the nature of the packaging during transportation, storage, fluid flow, and operation. Be sure to re-tighten the washer before use if the leak continues during use and does not stop even after re-tightening. Do a daily check and re-tighten it as soon as possible. When tightening, tighten the bolt evenly.

How to install a valve on a pipeline
How to install a valve on a pipeline

When replacing the sealing ring, avoid a dangerous situation by releasing the pressure inside the valve.

When attaching the hot/cold insulation cover to the valve, ensure the sealing ring can be tightened and the leak can be checked.

If the valve is used at high temperatures, re-tighten the bolts and joints (hot bolt) after the temperature rises to operating temperature.

Never loosen any bolts or nuts during operation.

Do not remove the actuator from the valve under pressure.

Notes on valve operation

When opening and closing the valve, be careful to:

  • Sound of liquid passing
  • Operating feeling
  • Movement of the valve body.

Also, check for any harmful vibrations or abnormal sounds and ensure that the valve operates smoothly.

When operating the valve, if there is a pressure gauge or flow meter nearby, keep an eye on the device regularly.

If the valve is equipped with a bypass valve. Before operating the main valve, preheat the main line by:

  • Let the liquid pass through the bypass valve
  • Equalize the pressure between the upstream and downstream sides of the main valve, etc.

When a liquid with a high temperature such as steam is allowed to pass through. It takes time for the valve to reach a steady state with temperature. The temperature is as uniform as possible so as not to cause adverse effects such as:

  • Thermal deformation
  • Uneven dilation
  • Gas stagnation, air release, etc.

If the fluid is liquid, open and close the valve slowly so as not to cause a water hammer.

If the fluid is a liquid in a closed line (the pipe is cut off by a shut-off valve, etc.). The pressure in a sealed fluid may increase abnormally due to an increase in the temperature of the liquid or of the medium. Please take appropriate measures such as:

  • Install more pressure relief valve
  • Following valve operating procedures does not create a closed pipeline.

It is recommended to periodically change the open/closed state of the valve. To avoid deterioration of serviceability or sticking of moving parts of the valve.

Product Maintenance Manual

To ensure that the product can be used safely for a long time. Conduct systematic daily and periodic checks. To detect abnormalities early and take appropriate measures when necessary. For details, please check the user manual that came with the product.

In addition, the product, even if used correctly, has a certain lifespan. This depends on the conditions of use and the characteristics of each product. It is necessary to replace components, replace products or change to suitable products.

Tiger Steel Cambodia is a branch of Bao Tin Steel Co., Ltd.

Leave a Reply

Your email address will not be published. Required fields are marked *