Tiếng Việt
ភាសាខ្មែរAs mentioned in the previous article, quality standards are a measure to evaluate the chemical composition and mechanical properties of steel pipes. These parameters help reflect the size, misuse, system compatibility, safety level, and lifespan of steel pipes. In today’s article, we will learn about Hoa Phat galvanized steel pipe standards. This will also be the answer to the question: Why is Hoa Phat steel pipe always chosen?
Standard ASTM A53
Hoa Phat galvanized steel pipes are produced according to many standards. One of them is ASTM A53 Grade A and Grade B standards. Hoa Phat steel pipes are certified for quality according to ASTM A53 standards by reputable organizations such as SGS, TUV, BV, etc. This standard applies to galvanized pipes with sizes DN15–DN300 (1/2–12 inches). Thickness: 2.27–12.7 mm.
Hoa Phat galvanized steel pipes that comply with this standard usually have good durability. Along with that is the ability to withstand high pressure and to be less susceptible to corrosion. Therefore, they are often used for pipeline systems carrying water, gas, steam, gas, oil, etc. Even used in load-bearing structures, boilers, etc..
It can be seen that, even though it is the same brand, each standard produces a type of galvanized steel pipe with different specifications and weights. Therefore, when buying a suitable tube, customers always need to carefully look for the type of tube they are about to buy. Understand the parameters and standards to choose the best quality products.
Standard ASTM A500, TCVN 3787-83
The next standards applied by Hoa Phat to galvanized steel pipes are two standards: ASTM A500 and TCVN 3787-83. At Hoa Phat, these two standards are applied to pipes with sizes 12.7–126.8. Thickness ranges from 0.7 to 6.0 mm. Typically, both of these standards stipulate characteristics such as:
Tiêu chuẩn ASTM A500
Ống thép mạ kẽm có thể đáp ứng tiêu chuẩn ASTM A500 này khi chúng được sản xuất theo quy trình mạ kẽm nhúng nóng phù hợp. Lớp mạ phải tuân thủ các yêu cầu về độ dày. độ bám dính và khả năng chống ăn mòn. Đây cũng là yếu tố giúp ống tôn mạ kẽm tiêu chuẩn ASTM A500 đặt được những đặc điểm sau:
- The pipe has a minimum tensile strength of 50,000 psi (345 MPa) and a minimum toughness of 20% elongation in 2 inches (50 mm).
- Minimum tensile strength 50,000 psi (345 MPa) and minimum toughness 20% elongation in 2 inches (50 mm).
- The pipe has good weldability to conventional welding methods.
TCVN 3783:2012 – Welded steel pipes – Common techniques
This standard specifies general technical requirements for welded steel pipes, including galvanized steel pipes. Vietnam standards for galvanized steel pipes include the following main contents:
- Dimensions, shapes, and tolerances of steel pipes
- Quality steel and galvanized coating
- Mechanical properties of steel pipes
- Test Method
- Marking and labeling requirements
With the regulations in this TCVN galvanized steel pipe, Hoa Phat steel pipe always achieves high quality. Not only is it heat resistant, has good load capacity, and has a long lifespan, but it also has a beautiful design. The fact that this brand has become a national steel brand has proven how highly users evaluate the quality of products here.
However, the two standards mentioned above still have slight differences. That is, ASTM A500 has lower requirements for zinc coating than TCVN 3787-83. ASTM A500 has a wider size range than TCVN 3787–83. Choosing the standard type of galvanized steel will depend on your requirements.
>> You can see more:
Hoa Phat steel pipe catalog 2024 – No. 1 market share in Vietnam
Specifications and weight of Hoa Phat galvanized steel pipes
[DETAILS] How to calculate the volume of galvanized steel pipes
Standard BS EN 10255:2004 (BS 1387:1985)
It can be seen that it is not natural that Hoa Phat galvanized steel pipes have become the top choice for many large projects and constructions. Producing steel pipes that meet the above quality standards is enough to show how much Hoa Phat Group has invested in the machinery system as well as the team of experts here.
Understanding the quality standards of Hoa Phat galvanized steel pipes will help people feel more secure about the materials they choose for the project. Currently, Bao Tin Steel is the leading distributor of Hoa Phat steel pipes in Vietnam. We guarantee to provide genuine steel pipes of absolute quality. Along with that, there is excellent delivery speed. Contact the hotline at 0932 059 176 for quick and guaranteed support.