Tiếng Việt
ភាសាខ្មែរStainless steel angle bar (V bar) – Decorative material for a modern – luxurious space.
With shiny properties, good anti-rust, especially easy to clean, and non-magnetic. Stainless steel V bar steel will definitely be a good choice for your interior space and construction space.
Learn more about stainless steel angle steel through this article on Tiger Steel!
Features and applications of stainless steel angle bar ( V bar)
Stainless steel angle with good corrosion resistance. High ductility, excellent tensile, forming, and spinning properties.
Especially non-magnetic, only becomes slightly magnetic when working at low temperatures.
The low carbon content means less carbide precipitation in the heat-affected zone. Especially during welding and the sensitivity to intergranular corrosion is lower.
In addition, the stainless steel angle bar is also resistant to most oxidizing acids and salt sprays. Things that can cause damage to your construction.
For angle steels made from 316 stainless steel, they are also resistant to sodium and calcium salt water. Resistant to hypochlorite solutions, phosphoric acid; sulfite alcohols, and sulfuric acids used in the pulp industry.
Thanks to such characteristics and strengths. Stainless steel angle steel is widely used in food and pharmaceutical processing rooms and marine exterior decorations.
In many luxury villas, a lot of stainless steel angle bar is also used to make interior and exterior decoration materials. Thanks to high aesthetics bring luxury to the house.
Types of steel used to make stainless steel angle bar
Stainless steel angle bar grade SUS201
Steel Type: Austenitic
Common name: Chromium-Manganese-Nickel Steel
Equivalent steel grades: ASME SA412, ASTM A276, ASTM A276, ASTM A412, ASTM A429, ASTM A666, FED QQ-S-766, SAE 30201, SAE J405 (30201), UNS S20100.
Chemical composition:
| CHEMICAL COMPOSITION | |||
|---|---|---|---|
| Component | Weight% | ||
| C | 0,15 | ||
| Mn | 5,5-7,5 | ||
| Si | 1 | ||
| Cr | 16.0-18.0 | ||
| Ni | 3,5-5,5 | ||
| P | 0,06 | ||
| S | 0,03 | ||
| N | 0,25 | ||
| Mechanical properties | |||
| Characteristic | Conditions | ||
| T (° C) | How to make | ||
| Density (× 1000 kg / m 3 ) | 7.8 | 25 | |
| Ratio Poisson | 0,27-0,30 | 25 | |
| Elastic modulus (GPa) | 197 | 25 | |
| Tensile (Mpa) | 515 | 25 | another annealing (plate, strip) |
| Productive power (Mpa) | 275 | ||
| Elongation (%) | 40 | ||
| Reduce area (%) | 45 | ||
| Thermal properties | |||
| Characteristic | Conditions | ||
| T (° C) | How to make | ||
| Thermal expansion (10 -6 / ºC) | 15,7 | 0 – 100 half | |
| Thermal conductivity (W / mK) | 16,2 | 100 nữa | |
| Specific heat (J / kg-K) | 500 | 0 – 100 | |
| Electrical properties | |||
| Characteristic | Conditions | ||
| T (° C) | How to make | ||
| Resistivity (10 -9 W -m) | 690 | 25 | |
Stainless steel angle bar grade SUS304
Equivalent steel grades: T304, SS304, 304SS, 304 SS, UNS S30400; AMS 5501/ 5513/ 5560/ 5565/ 5566/ 5567/ 5639/ 5697; ASME SA182/ SA194 (8)/ SA213/ SA240/ SA249/ SA312/ SA320 (B8)/ SA358/ SA376/ SA403/ SA409/ SA430/ SA479/ SA688; ASTM A167/ A182/ A193/ A194/ A666; FED QQ-S-763, MILSPEC MIL-S-5059, SAE 30304, DIN 1.4301, X5CrNi189, B.S. 304 S 15, EN 58E, PN 86020 (Poland), OH18N9, ISO 4954 X5CrNi189E, ISO 683/13 11, 18-8
Steel specifications:
| Component | Concentration % |
| C | Max 0.08 |
| Cr | 18 – 20 |
| Fe | 66.345 – 74 |
| Mn | Max 2 |
| Ni | 8 – 10.5 |
| P | Max 0.045 |
| S | Max 0.03 |
| Si | Max 1 |
| Physical properties | Metric system | pounds | Annotate |
| Proportion | 8 g/cc | 0.289 lb/in³ | |
| Mechanical properties | |||
| Stiffness Brinell | 123 | 123 | Estimated value based on hardness Rockwell B |
| StiffnessKnoop | 138 | 138 | Estimated value based on hardness Rockwell B. |
| Stiffness Rockwell B | 70 | 70 | |
| Stiffness Vickers | 129 | 129 | Estimated value based on hardness Rockwell B. |
| tensile stress | 505 MPa | 73200 psi | |
| Flow yield | 215 MPa | 31200 psi | at 0.2% offset |
| Elongation | 70 % | 70 % | in 50 mm |
| Modul đàn hồi | 193 – 200 GPa | 28000 – 29000 ksi | |
| Coefficient Poisson’s | 0.29 | 0.29 | |
| Impact force Charpy | 325 J | 240 ft-lb | |
| Power cut | 86 GPa | 12500 ksi | |
| Calculate electric | |||
| Resistivity | 7.2e-005 ohm-cm | 7.2e-005 ohm-cm | at 20°C (68°F); 1.16E-04 at 650°C (1200°F) |
| Magnetic contagion | 1.008 | 1.008 | at RT |
| Heat characteristic | |||
| CTE, linear at 20°C | 17.3 µm/m-°C | 9.61 µin/in-°F | from 0-100°C |
| CTE, linear at 250°C | 17.8 µm/m-°C | 9.89 µin/in-°F | at 0-315°C (32-600°F) |
| CTE, linear at 500°C | 18.7 µm/m-°C | 10.4 µin/in-°F | at 0-650°C |
| Heat capacity | 0.5 J/g-°C | 0.12 BTU/lb-°F | from 0-100°C (32-212°F) |
| Heat conduction | 16.2 W/m-K | 112 BTU-in/hr-ft²-°F | at 0-100°C, 21.5 W/m°C at 500°C |
| Melting temperature | 1400 – 1455 °C | 2550 – 2650 °F | |
| Solidus | 1400 °C | 2550 °F | |
| Liquidus | 1455 °C | 2650 °F | |
Stainless steel angle bar grade SUS316
Equivalent steel grades: UNS S31600, AISI 316, DIN 1.4401, DIN 1.4408, DIN X5CrNiMo17122, TGL 39672 X5CrNiMo1911, TGL 7143X5CrNiMo1811, ISO 2604-1 F62, ISO 2604-2 TS60, ISO 2604-2 TS61, ISO 2604-4 P60 , ISO 2604-4 P61, ISO 4954 X5CrNiMo17122E, ISO 683/13 20, ISO 683/13 20a, ISO 6931 X5CrNiMo17122.
Steel specifications:
| Component | Wt. % |
| C | 0.08 |
| Cr | 17 |
| Fe | 65 |
| Mn | 2 |
| Mo | 2.5 |
| Ni | 12 |
| P | 0.045 |
| S | 0.03 |
| Si | 1 |
| Physical properties | Metric system | pounds | Annotation |
| Proportion | 8 g/cc | 0.289 lb/in³ | |
| Mechanical properties | |||
| Stiffness Brinell | 149 | 149 | |
| Stiffness Knoop | 169 | 169 | Estimated value based on hardness Brinell |
| Stiffness Rockwell B | 80 | 80 | |
| Stiffness Vickers | 155 | 155 | Estimated value based on hardness Brinell |
| Tensile stress | 550 MPa | 79800 psi | |
| Flow yield | 240 MPa | 34800 psi | |
| Elongation | 60 % | 60 % | in 50 mm |
| Elastic module | 193 GPa | 28000 ksi | |
| Impact force Charpy | 105 J | 77.4 ft-lb | V-notch |
| Izod impact force | 129 J | 95.1 ft-lb | |
| Electrical characteristics | |||
| Resistivity | 7.4e-005 ohm-cm | 7.4e-005 ohm-cm | at 20ºC |
| Magneticity | 1.008 | 1.008 | at RT |
| Heat characteristic | |||
| CTE, linear at 20°C | 16 µm/m-°C | 8.89 µin/in-°F | 0 – 100ºC |
| CTE, linear at 250°C | 16.2 µm/m-°C | 9 µin/in-°F | at 0-315°C (32-600°F) |
| CTE, tuyến tính ở 500°C | 17.5 µm/m-°C | 9.72 µin/in-°F | 0 – 540ºC |
| Heat capacity | 0.5 J/g-°C | 0.12 BTU/lb-°F | from 0-100°C (32-212°F) |
| Heat conduction | 16.3 W/m-K | 113 BTU-in/hr-ft²-°F | 100ºC |
| Melting temperature | 1370 – 1400 °C | 2500 – 2550 °F | |
| Solidus | 1370 °C | 2500 °F | |
| Liquidus | 1400 °C | 2550 °F | |
Contact sales department:
Below is information on sales staff currently working at Bao Tin Steel. Please check who gave you the quote, if the name and phone number are not correct, please call immediately. 093 127 2222 to confirm.
– Mr Minh Dũng 
0906 909 176
- Mr Phúc <imgsrc="https://thepbaotin.com/images/icons/phone-call.svg" alt="Nhân viên kinh doanh" width="10px" />0936 012 176
- Ms Huyền <imgsrc="https://thepbaotin.com/images/icons/phone-call.svg" alt="Nhân viên kinh doanh" width="10px" />0932 022 176
– Mr Davet +855 9 6869 6789
– Ms Dara +855 6869 6789
| Khu vực miền Bắc - Hà Nội | Khu vực miền Nam - TPHCM | Tại Campuchia - Phnom Penh |
|---|---|---|
| - Mr Minh Dũng <imgsrc="https://thepbaotin.com/images/icons/phone-call.svg" alt="Nhân viên kinh doanh" width="10px" />0906 909 176
- Mr Phúc - Ms Huyền |
- Mr Văn Hương <imgsrc="https://thepbaotin.com/images/icons/phone-call.svg" alt="Nhân viên kinh doanh" width="10px" /> 0903 332 176
- Ms Thanh Hằng - Ms Thùy Dung |
- Mr Davet <imgsrc="https://thepbaotin.com/images/icons/phone-call.svg" alt="Nhân viên kinh doanh" width="10px" /> +855 9 6869 6789
- Ms Dara |
Hệ thống chi nhánh Thép Bảo Tín
THÉP BẢO TÍN MIỀN NAM
- TRỤ SỞ CHÍNH: 551/156 Lê Văn Khương, P. Hiệp Thành, Quận 12, TP HCM
- KHO ỐNG MIỀN NAM: 242/26 Nguyễn Thị Ngâu, ấp Trung Đông 2, xã Thới Tam Thôn, Hóc Môn, TP.HCM
- ĐT: 0932 059 176 – 0767 555 777
- Email: bts@thepbaotin.com
THÉP BẢO TÍN MIỀN BẮC
- VP HÀ NỘI: 17 Ngõ 62, Tân Thụy, Phúc Đồng, Long Biên, Hà Nội
- KHO ỐNG THÉP BẮC NINH: Thôn Đông Yên, xã Đông Phong, huyện Yên Phong, tỉnh Bắc Ninh (KCN Yên Phong)
- ĐT: 0906 909 176 - 0903 321 176
- Email: mb@thepbaotin.com
BAO TIN STEEL CAMBODIA
- VĂN PHÒNG PHNOM PENH: 252 National Road 1, Prek Eng, Chbar Ampov, Phnom Penh, Campuchia
- BAO TIN STEEL WAREHOUSE: 248 National Road 1, Prek Eng, Chbar Ampov, Phnom Penh, Campuchia
- Hotline: 09 6869 6789 – 06869 6789
- Email: sales@baotinsteel.com
Chính sách hậu mãi - giao hàng khi mua hàng tại Thép Bảo Tín
Cam kết tiêu chuẩn chất lượng
- Các sản phẩm được bán ra với mức chuẩn, có tem mác rõ ràng.
- Đầy đủ thông số và trọng lượng phù hợp cho mọi công trình.
- Có các kho hàng ở các vị trí trung tâm, hỗ trợ vận chuyển tận chân công trình.
- Giá có thể chiết khấu tùy vào số lượng đơn hàng.
- Xử lý đơn chuyên nghiệp - Đầy đủ hóa đơn VAT.
- Cấp đủ chứng từ CO, CQ, CNXX.
- Quý khách hàng khi mua hàng tại Bảo Tín đều được quyền tới tận kho xem và kiểm tra sản phẩm trước khi đặt cọc.